Precautions for Aluminum Profile Processing

Aluminum profiles commonly used in industry are a kind of pipeline profiles, commonly used 4040 aluminum profiles, 3030 aluminum profiles and so on. However, aluminum processing is nothing more than drilling, cutting, tapping (threaded holes) and special surface treatment for extruded aluminum profiles. The following we will introduce what problems should be paid attention to in the aluminum processing process?

In terms of drilling, many times not only aluminum profiles to punch holes, most of the time we are in the assembly process of aluminum profiles are in the frame engineering drilling steel. When punching, we should position the punching machine correctly, and we should choose high-quality and qualified aluminum processing materials. Whether it is the surface of the plate or the profile, it is smooth and flat and there is no burr on the surface after processing, and the hole is also very smooth. If there are burrs, we can use high-quality and qualified aluminum processing. Another important process of aluminum profile processing is tapping, which is the same as drilling, tapping machine to adjust the position, select the correct aperture size, but also to ensure that the threads of the threaded holes are orderly. The other is cutting, and now many aluminum processing manufacturers choose laser cutting, the end face is very flat, the accuracy is very high, and the general control is within + 0.2mm.

In addition to aluminum processing parts and aluminum quality, attention should also be paid to the service life of the above equipment and possible problems in use. Therefore, in aluminum processing, it is necessary to choose the right product and the right equipment, and it is essential for the overhaul and maintenance of the equipment.